As already known, the D-loco needed some post-delivery (to traffic) adjustments and so on, and during August, the transfers/decals were lacquered; and then the loco was finally put away in its box, ready for traffic (or new pantographs)!

T21 64 broke-down during the old FLMJ’s last year, and it was found that the motor had simply stopped working. It also needed some cosmetic repairs.

1. We contacted Heljan to ask about getting a new motor, and one would cost DKK 500 including P+P (about £60), but the payment method that they wanted would have added £25-30 in bank charges! We then found a supplier of ‘replacement’ motors to fit Heljan’s 00-scale models, but they were unhelpful regarding our enquiry about dimensions—the T21 is not a 00-model; but Howes in Oxford did respond favourably, so they got the order—and we paid £15.50 for the perfectly fitting replacement!
2. Connected to a 9v battery, the motor runs beautifully. So, it was mounted into the lower portion of the chassis and tested again, running beautifully and turning the wheels. Then we joined the two halves of the chassis, and there was no movement at all! But when we took it apart again, the motor was fine. So, more investigation is necessary (for next month).
3. Whenever handling the model, bits have fallen off, and it seems that Heljan just didn’t think this one through. The chassis (in two halves with a running plate sandwiched between) is obviously metal, but the steps are soft plastic, and the handrails for the steps are metal. So, the steps are easily nudged, causing the handrails to drop out. The tanks under the running plate are plastic, and these fall off at every opportunity. There are very small indents on the metal chassis and running plate for these plastic artefacts, not enough to properly grip them. So, additionally, brake shoes and hoses, and hooter, all came off. We found, when we took the chassis apart, that the steps were now vulnerable in that they supported the weight of the running plate.
4. We found that Heljan’s instructions for taking the loco apart were wrong. It says in Danish, “Løsgør forsigtigt kabinen, sådan man kan forsigtigt kan løfte kabinen op ved et let tryk på siderne”; or in Swedish, “Montera försiktigt av hyttan genom att trycka försiktigt på sidorna”. In either language, we are told that one needs to gently press on the sides of the cab. In reality, the sides need prising out, not pressing in! Whilst battling with the wrong instructions, parts of the loco were getting damaged, including the fibre optics to the lighting!
5. We started by simply repairing what was damaged, but after three days’ work, it became apparent that the loco needed a more thorough rebuild, including metal reinforcement behind the steps, proper fixing tabs for the other artefacts, and even a better way of fixing the buffers (which had also come off)! Everything that hadn’t fallen off needed pulling off.

• 

Tc 306 entered service a few years ago, having been built on-site as a Modellproduktion body on a Roco chassis; and then there were issues with the gears not meshing properly! However, all sorted, we simply overlooked the fact that we had also bought a bag full of accessories from Entec to paint and fit to the model, so it was now time to do it. This also proved challenging! The instruction sheet is not at all clear (bad printing) and a lot of guess-work was necessary!

1. Being a sheet of etched material, the flat steps needed gluing on to the rungs of what is best described as a ladder. The ladder includes the handrails, so it needed to be bent to shape! Whilst the main part of this required a 90° turn, some handrails needed different angles and in all cases, holes needed to be drilled in the chassis for them. The etched sheet was not clearly labelled, and we were to find out that the ‘A’ end steps are the ones that actually go in the middle!
2. We used the last of the plastic strip that we had available to make two large steps at the ‘B’ end for the handrails to attach to (it really does seem that they should have been part of the original mould)! Suitably painted, these blend in nicely, but the top step on the ladders at the ‘B’ end is possibly too high—there were no clues about how to fit them.
3. But the difficult part was the windscreen wipers, which were too big and etched incorrectly. The armature that pokes into the body needed bending through 90°, but the wiper-blades also needed bending through 90°, but not from the same perspective! Armed with suitable pliers and initiative, we managed to get them fitted, suitably trimmed, of course. Comparatively, the mirrors and guards for them were very easy to make and fit!
4. Finally, its box was modified to make room for the fitted attachments, and the whole loco looks much nicer, now.

• 

UF6 1576 is a model of a short baggage car of the type built by Hilding Carlsson. It would have been type UF2, and gone into trains with similar styled railbuses. But a few were modified to work with the newly delivered YCo6 variety, so this is the case with our model. It was purchased from a fayre in Stockholm, and we think it is a Lokstallet model. It needed three jobs to be done.

1. The first of these was the fitting of stabilisers to reduce sideways play. The mounting blocks for the wheel-sets seem to have H0e if mounted one way, and H0 if mounted the other; this model has then set for H0e, but has H0 wheel-sets in! For stabilisers, we used plastic strip between the blocks and the wheel-backs.
2. The second job was to fit couplings, to make it compatible with the YCo6 railbuses. This meant using standard H0 couplings, but lower down, and therefore with the ‘tongue’ cut off. We had brought Y7 1136 from storage as well, to use as a test match vehicle!
3. The third job was the decals, which really needed to be purchased from Sweden, so instead, ‘temporary’ number plates have been made (so that the model can be legitimately used) until we are able to get the correct decals.

• 

We have a Yp railbus on the workbench at the moment; but more about that, and one that we passed to a Friend, next time!

The three SMJ carriages have received lacquer over their transfers, but also some SJ brown paint has appeared on the etched end panels where appropriate. The final job here was to make an ‘interior’ for each of their boxes so that they could be safely put away. They’re all the same and a bit strange, but they make the most of the materials that we had available!

• 

Two NMJ RB1 carriages have arrived into store, and these will go into InterCity trains (already designated). Sadly, HNoll continues to have production issues with the R4R (which seems to be tooling and then a production queue at the Chinese factory), but they at least have the kindness to keep modellers up to date with the situation.

• 

Back in March, we advised about the proposed production of Swedish model cars from Minichamps, Saab and Volvo models. We are now aware that PCX87 is proposing a 1989 version of the Volvo 240GL estate. It would be interesting to compare this with the Minichamps 1986 model. (We would prefer, of course, late 1970s versions!)

In Website news, we have taken down the “Forthcoming Events” page because in the current climate, events are few and far between, and when things do get up and running again, we are going to be in a different place in different circumstances. Recognising the big changes taking place (and changing technology), we are working on the creation of a new website also, which we hope will look better and be more relevant, yet just as informative as now.