Author Archives: Adrian

Nyheter för andra kvartalet 2025

Våra Nyheter

T21 64 har äntligen förklarats i tjänst! Det senaste arbetet har inneburit att denna Heljan-modell har utrustats med helt nya (hemgjorda) steg och ledstänger, de nyare buffertarna har satts om och ett bättre fäste för tutaren har gjorts så att den är mindre benägen att slås av. Nästa större service är planerad 2028 och förhoppningsvis klarar den sig dit utan att det behöver göras något större arbete innan dess!

Med hjälp av ett lån har Jecos nyaste modeller, släpvagnarna UBF7Z och UDFo15 som ska användas till Y6/Y7-rälsbussarna, anlänt, och dessa har utrustats med fungerande kopplingar som inte kräver att tåget vänds för att kopplas till eller från! ‘UBF’ har två delvis öppna fönster, vilket tyder på att den inte bör användas i vintertrafik (på riktigt, Jeco?), och ett av dem är vid toalettutrymmet! En annan liten irritation med dessa modeller är att de har fungerande innerbelysning, som är för stark och därför mer liknar att vara bara leksaker!

FV1 55816 har fått sina ledstänger ommålade i sidensvart (från krom/silver) för att få det att se lite mer autentiskt ut. I alla andra avseenden är denna Heljan-modell bra att köra.

Rickbackens stationsbyggnad (anpassad från Heljan-modellen, “Åmål”) har byggts med en enkel interiör för att eventuell belysning ska se realistisk ut. Normalt har tryckta “gardiner” ett svart område där de är “öppna”, vilket innebär att när innerbelysningen är tänd kan man se mönstret på gardinerna och inte inuti, vilket är helt fel. Så med detta experiment ska interiören synas – subtilt – och gardinerna mindre transparenta. Arbetet har pausats tills vi har mera pengar (för belysningen).

Modell Nyheter

Det svenska loket “Of” ska produceras av NMJ i deras prisvärda “Topline”-serie. Det kommer att finnas två exemplar av detta dubbellok, 78+79 och 84+85. Tekniskt sett är dessa samma som de norska loken “El.3”, som NMJ också producerar. “Of”, en utveckling av det mindre tillförlitliga “Oe”, var föregångaren till loket “Dm” och användes mestadels på malmbanan i norr.

Det orangea Rc2-loket som föreslås av Jeco anges på deras webbplats vara nummer 1094, men de har producerat en tryckt katalog där de också annonserar nummer 1097. Katalogen antyder att 1094 kommer att vara i original Epok III-lackering och 1097 kommer att vara i Epok IV-lackering, men Jeco kunde inte bekräfta någotdera, förvirrade särskilt eftersom 1097 inte ens finns på deras webbplats.

Det kommer att finnas tre nya Y2-enheter från Dekas, efter succén med deras första lansering. Men de lägger till en tredje färgsättning – den ursprungliga från när tågen körde längs Blekingebanan. Denna andra omgång kommer att ha nummer 1375 som Y2 i originalfärgsättning, 1377 som Y2K (som deras första i R/G/B-färgsättning) för trafik till Linköping och Stockholm, och sedan 1381 som Y2R i den nuvarande färgsättningen.

Det kommer att finnas fler ‘Ge’- och ‘Gs’-vagnar från Dekas, några av dem i märkesfärgsättning (inklusive en gul “ASG”-version), tre UIC- och tre pre-UIC-vagnar. Det kommer också att finnas pre-UIC ‘Hs’-vagnar (från slutet av 1960-talet) – en typ som blev ‘I’ (isolerad) enligt UIC-specifikationen.

Det norska El.15-loket ska produceras av NMJ i deras prisvärda ‘Topline’-serie. El.15 användes tillsammans med Dm/Dm3-lok på malmbanan i norr, ofta i par. Modellen kommer att finnas tillgänglig i fyra versioner lämpliga för den linjen, plus två nyare färger. NMJ hade producerat denna tidigare i sitt dyra “Superline”-sortiment, så detta är en välkommen modell.

Tillverkarens Nyheter

Vi är oroade över de senaste nyheterna från HNoll.
Ägaren attackerar nu de mindre butikerna med deras begränsade budgetar för att de inte har hela sortimentet av hans modeller i lager; de kommer att förbjudas att förbeställa utvalda framtida modeller! Han gör detta för att straffa dem för att de inte har resurser att sälja hela sortimentet, och har uppmanat kunderna att överväga att byta var de köper sina modeller ifrån, vilket är giftigt och skadligt för hobbyn i stort!
De efterlängtade Blue-X/IC-11-vagnarna kommer endast att säljas i ett 5-pack, vilket kommer att lamslå eller förbjuda personer med låg budget och personer med mindre järnvägsutrymmen (och detta kommer naturligtvis att minska antalet modeller som säljs, vilket han utan tvekan kommer att klaga på och skylla på alla utom sig själv).
Dessutom har han misslyckats med att korrigera ett detalj “misstag” med den efterlängtade “B11” och har sagt till modellbyggare att “små misstag kan och måste få passera” (vilket gör hans modeller inte bättre än Rocos).
AB7, AB9, BFS9, RB7, AFM7 och A7/B7 i första generationen är nu inställda.
Han verkar omedveten om att Sverige har en ekonomisk recession just nu och att både människor och handlare har mycket begränsade budgetar. Detta verkar vara början på den sorgliga nedgången för vad som ursprungligen var ett lovande företag.

Det finns en del sorgliga nyheter från SV&LV. I ett nyhetsbrev har ägaren starkt antytt att avveckla verksamheten på grund av dålig hälsa och andra olyckliga faktorer. Detta kommer också att påverka det tidigare varumärket Perlmodell. Precis som med Entec och Modellproduktion förra året känner vi inte till någon som är i en position att ta över sortimentet.

Andra intressanta nyheter

Denna uppdatering sammanfaller med evenemanget ”Hjul i maj” som anordnas av Nässjö järnvägsmuseum den 10 maj, och som också firar 60-årsjubileum i år. Evenemanget ”Hjul i maj” inkluderar två återvändande turer till Eksjö bakom ett ånglok, och andra evenemang planeras. Dessutom är den 10 maj separat, dagen för “Nässjö Street Festival,” så en intressant dag, särskilt för att besöka staden!

News for second quarter, 2025

Our News

T21 64 has finally been declared fit for service! The most recent work has seen this Heljan model fitted with completely new (home-made) steps and handrails, the newer buffers re-seated, and a better mount made for the hooter so that it is less prone to being knocked off. Its next major overhaul is due 2028 and hopefully it will make it to then without needing major work beforehand!

With the help of a loan, Jeco’s newest models, the UBF7Z and UDFo15 trailers to go with the Y6/Y7 railbuses, arrived, and these have been retrofitted with working couplings that don’t require the train to be turned over to be coupled or uncoupled! The ‘UBF’ has two partially open windows, which suggests that it shouldn’t be used in winter traffic (really, Jeco?), and one of them is at the toilet compartment! Another slight irritation with these models is that they have working interior lighting, which is too bright and therefore, more akin to being just toys!

FV1 55816 has had its handrails repainted satin black (from chrome/silver) to make it look a little more authentic. In all other respects, this Heljan model is good to run.

Rickbacken station building (adapted from the Heljan model, ‘Åmål,’) has been built with a basic interior for eventual lighting to look realistic. Normally, printed ‘curtains’ have a black area where they are ‘open’ which means that when the interior lights are on, one can see the pattern on the curtains and not inside, which is completely wrong. So, with this experiment, the interior should be seen—subtly—and the curtains less transparent. Work has paused until we have healthy funds (for the lighting).

Model News

The Swedish ‘Of’ locomotive is to be produced by NMJ in their affordable ‘Topline’ range. There will be two copies of this double-loco, 78+79 and 84+85. Technically, these are the same as the Norwegian ‘El.3’ locomotives, which NMJ is also producing. The ‘Of’, a development of the less reliable ‘Oe’, was the forerunner to the ‘Dm’ loco, and was used mostly on the iron ore railway in the far north.

The orange Rc2 proposed by Jeco is given on their website to be number 1094, but they have produced a printed catalogue in which they also advertise number 1097. The catalogue suggests that 1094 will be in original Epoch-III livery and 1097 will be in Epoch-IV livery, but Jeco were unable to confirm either way, confused especially as 1097 is not even on their website.

There will be three new Y2 units from Dekas, following the success of their first release. But they are adding a third livery – the original one for when the trains worked along the Blekinge line. This second batch will have numbers 1375 as Y2 in the original livery, 1377 as Y2K (like their first in the R/G/B livery) for services to Linköping and Stockholm, and then 1381 as Y2R in the current livery.

There are to be more ‘Ge’ and ‘Gs’ Wagons from Dekas, some of them in branded liveries (including a yellow “ASG” version), three UIC and three pre-UIC. There will also be pre-UIC ‘Hs’ wagons (from the late 1960s) – a type that became ‘I’ (insulated) under UIC specification.

The Norwegian El.15 locomotive is to be produced by NMJ in their affordable ‘Topline’ range. The El.15 worked alongside Dm/Dm3 locomotives on the iron ore railway in the far north, often in pairs. The model will be available in four versions suitable for that line, plus two more recent liveries. NMJ had produced this earlier in their pricey ‘Superline’ range, so this is a welcome model.

Manufacturer News

We are alarmed with the latest news from HNoll.
The proprietor is now attacking the smaller retailers with their limited budgets for not stocking the full range of his models; they will be banned from pre-ordering selected future models! He is doing this to punish them for not having the resources to carry the full range, and has told customers to consider changing where they buy their models from, which is toxic and harmful to the hobby all round!
The awaited Blue-X/IC-11 models will only be sold in a set of five carriages which will cripple or prohibit people on low budgets and people with smaller layouts (and of course, reduce the quantity of models that get sold, which no doubt, he will complain about and blame everybody except himself).
Furthermore, he has failed to correct a detail ‘mistake’ with the awaited ‘B11’ and has told modellers that they must accept the imperfections (which makes his models no better than the Roco ones).
AB7, AB9, BFS9, RB7, AFM7 and A7/B7 in the 1st generation are now cancelled.
He seems oblivious to the fact that Sweden has an economic recession right now and people and traders have very limited budgets. This seems to be the start of the sad fall of what was originally a promising enterprise.

There is some sad news from SV&LV. In a newsletter, the proprietor has hinted quite strongly at winding up the business due to poor health and other unfortunate considerations. This will also affect the former Perlmodell brand. As with Entec and Modellproduktion last year, we do not know of anyone who is in a position to take over the range.

Other News

This update coincides with the “Wheels in May” (Hjul I maj) event being organised by the Nässjö railway museum on 10th May, who are also celebrating their 60th anniversary this year. The ‘Wheels in May’ event includes two return workings to Eksjö behind a steam loco, and other events are being planned. Furthermore, 10th May is separately, the day of the Nässjö Street Festival, so an interesting day especially to visit the town!

Nyheter för första kvartalet 2025

Våra Nyheter

Heljans T21 (den här gången vårt lok nummer 64) fortsätter att reta! Under januari har ytterligare förstärkningar av stegen skett, men nu ser modellen ful ut. Vi överväger att bygga helt nya trappsteg medan vi väntar på chansen att börja bygga den nya järnvägen!

Tillverkarens Nyheter

Jeco tillkännagav flera nya modeller (inte bara en) den 1 februari, och här är en sammanfattning.

  • TGOJ Bt-loco kommer att finnas i tre orange versioner och två gröna. (Detta var ursprungligen tillgängligt från dem som en dyr metallmodell!)
  • Ra-loket ska återutges i två originalversioner av orange (med blå rand) och tre senare (med bred vit rand) versioner.
  • Den helt omarbetade T43:an kommer att finnas i flera versioner; röd/vit/blå (två kommer att erbjudas), orange med original ‘kjol’ ​​(två kommer att erbjudas), orange modifierad utan ‘kjol’, Banverkets varumärke och IBAB-märke.
  • Och helt nya är två versioner av TGOJ X21 2-bilsenheter (i grönt eller orange), och X22, men vilken version av X22 är oklart i detta skede (SJ blå är en välgrundad gissning).

Goda nyheter för Saab-fans, PCX87 har annonserat 900 som en fyradörrars sedan 1981 i det vanliga urvalet av fyra färgversioner, plus som en svensk polisbil. Under tiden har deras modell av 9000 CC från 1985 nu nått butikerna. (Samtidigt är Alfa Romeo 164 tillgänglig; båda bilarna byggdes på samma “plattform” (tillsammans med Fiat Croma och Lancia Thema), men Saaben hade ett helt annat “utseende” på grund av de extra säkerhetsåtgärderna som Saab inkluderade.)

Med tanke på den relativt senaste produktionen (år 2021) av PCX87 av Saab 900 i skick 1986, har Minichamps ändrat datumspecifikationen för deras föreslagna modeller (cabriolet och 3-dörrars coupé) från 1987 till 1995, vilket skulle göra dem till den första GM-era Saab-modeller i H0-skala. Även om ett pris i euro föreslås, anges inget releasedatum.

Fortfarande med Minichamps väntar fortfarande Volvo 240 sedan- och herrgårdsmodeller, 1986-versioner, som skulle ligga nära PCX87. Vi undrade om de kunde byta årsmodell med dessa bilar också, men konstigt nog av de åtta föreslagna (två version i fyra färger) är den röda herrgårdsbilen märkt som förväntad i mars 2025.

Andra intressanta nyheter

2025 är det 100 år sedan D-loket introducerades. Det är tveksamt att vi kommer att kunna markera denna prestation här (ingen layout att göra detta på), men vi får se hur det blir. Kanske blir det evenemang på järnvägarna i skala 1:1?

Vår nästa uppdatering kommer förmodligen någon gång under maj.

News for first Quarter, 2025

Our News

Heljan’s T21 (this time our loco number 64) continues to irritate! During January further strengthening of the steps has taken place, but now the model looks unsightly. We are considering taking advantage of the delay in getting the new layout started to use the time to build four completely new sets of steps!

Manufacturer News

Jeco announced several new models (not just one) on February 1st, and here is a summary.

  • The TGOJ Bt-loco will be available in three orange versions, and two green. (This was originally available from them as an expensive metal model!)
  • The Ra-loco is to be reissued in two original orange (with blue lining) versions, and three later (with broad white lining) versions.
  • The completely retooled T43 is to be available in several versions; red/white/blue (two to be offered), orange with original ‘skirt’ (two to be offered), orange modified without ‘skirt’, Banverket livery, and IBAB livery.
  • And completely new are two versions of the TGOJ X21 2-car units (in green or orange), and the X22, but which version of the X22 is unclear at this stage (SJ blue is an educated guess).

Good news for Saab fans, PCX87 has announced the 900 as a 1981 four-door sedan in the usual selection of four colour versions, plus as a Swedish police car. In the meantime, their model of the 9000 CC from 1985 has now reached the shops. (At the same time, the Alfa Romeo 164 is available; both cars were built upon the same ‘platform’ (along with the Fiat Croma and Lancia Thema), but the Saab had a very different ‘look’ due to the extra safety measures that Saab incorporated.)

Given the reasonably recent production (in 2021) by PCX87 of the Saab 900 in 1986 condition, Minichamps has changed the date specification of their proposed models (cabriolet and 3-door coupé) from 1987 to 1995, which would make them the first GM-era Saab models in H0 scale. Whilst a price in Euros is suggested, no release date is given.

Still with Minichamps, the Volvo 240 sedan and estate models are still awaited, 1986 versions, which would be close to the PCX87 ones. We wondered if they might change the year model with these cars also, but curiously of the eight proposed (each version in four colours), the red estate is marked as anticipated in March 2025.

Other News

2025 is the 100th anniversary of the introduction of the D-loco. It is doubtful that we will be able to mark this achievement here (no layout to do this on), but we’ll see how things turn out. Maybe there will be events on the 1:1 scale railways?

Our next update will probably be sometime during May.

Nyheter från december 2024

Våra Nyheter

Båda T21-loken har fått en del service, främst för att förbättra trappsteg och ledstänger. Stödblock har monterats bakom de värsta stegenheterna för att göra dem mindre flexibla, så att ledstänger inte hoppar ut vid normal användning! T21 87 färdigställdes under december, men arbetet med T21 64 ska vara klart under januari.

Z69 659 har också sett en del kosmetiskt arbete utfört; ett steg har tillhandahållits under varje hyttdörr och detta har gjort det möjligt för oss att tillhandahålla ett bättre placerat “uttag” för ledstänger närmast dörrarna så att de inte ser ut som om de blockerar dörrarna från att öppnas. En liten detalj, men bra för att hålla kompetensen uppdaterad samtidigt som det inte finns mycket annat arbete som kan göras just nu…

Samtidigt som vi har förberett platsen för den nya järnvägen har vi också kämpat mot hinder, varav ett är Sveriges höga arbetslöshet (för närvarande 7,4 %), som påverkar oss här; och ingen start på den nya järnvägen kan påbörjas förrän en personlig inkomst har skaffats! Ett Gantt-diagram har tagits fram för att hjälpa till med planering av järnvägens projektion, men 2025 är ett mycket “lätt” år av denna anledning. Om det kommer bra sysselsättningsnyheter snart så kan schemat flyttas fram (oaktat behov av ny bil, ny dator, ny den här, ny den och så vidare)!

Tillverkarens Nyheter

Jeco/MJ-Hobby släpper en ny modell den 1 februari, men dess identitet förblir en hemlighet. Det blir en ”nyhetslördag” i butiken under dagen, där folk uppmanas att boka sin närvaro. Även om dramatiken och spänningen i att avslöja hemligheten kan vara kul; om den nya modellen inte är något som folk vill ha, skulle det vara en bortkastad resa med en känsla av besvikelse. RTJ-vännerna överväger oddsen på följande möjligheter; den omarbetade T43-dieseln (som tidigare antytt, så inte precis en “överraskning”); ångloket S1 som föreslogs för några år sedan; X50 Regina-tågen som föreslogs för några år sedan; Z67 diesel shunter som föreslogs för några år sedan; elloket Mg som en välbehövlig möjlighet; T4 eller senare T41 diesellok som en välbehövlig möjlighet; och ånglok typ B som en välbehövlig möjlighet! Släpvagnarna till Y6-rälsbussarna har föreslagits ett tag så de kan knappast betraktas som en hemlighet; och Jeco har annonserat ytterligare en orange Rc2 (som 1094) och en svart Rc3 (som 1067).

Andra intressanta nyheter

2024 var det 75 år sedan den första Saab-bilen gick i produktion. Vi hade hoppats på att ha ett bilrally någonstans på en layout (som vi har gjort tidigare) för att fira detta, men vi har ingen layout, bara ett fåtal av våra modeller tillgängliga, och den nya modellen av 9000 är inte tillgänglig ännu. Så vårt foto (på den engelska nyheterna) visar en 92B, 99 och tre versioner av 900.

Detta är vår sista månadsuppdatering. Vi kommer att ge korta uppdateringar under månaderna 2, 5, 8 & 11; så nästa kommer inte att vara för långt efter, och kommer förmodligen inte att ha så mycket nyheter! Gott nytt år till alla våra vänner, nära och fjärran.

News from December 2024

Our News

Both T21 locomotives have received some servicing, mainly to improve the steps and handrails. Supporting blocks have been mounted behind the worst of the step units to make them less flexible, so that the handrails don’t pop out during normal use! T21 87 was completed during December, but the work on T21 64 should be completed during January.

Z69 659 has also seen some cosmetic work done; a step has been provided under each cab door and this has enabled us to provide a better-placed ‘socket’ for the handrails nearest the doors so they don’t look as if they’re blocking the doors from opening. A minor detail, but good for keeping the skills up to date whilst there is not much other work that can be done at this point…

Whilst we have been preparing the location for the new railway, we have also been battling obstacles, one of which is Sweden’s high unemployment rate (currently 7.4%), which is affecting us here; and no start on the new railway can commence until a personal income has been sourced! A Gantt chart has been produced to help with planning the railway’s projection, but 2025 is a very ‘light’ year for this reason. If there is good employment news soon, then the schedule can be brought forward (notwithstanding the need for a new car, new computer, new this, new that, and so on)!

Manufacturer News

Jeco/MJ-Hobby is to release a new model on February 1st, but its identity remains a secret. There will be a “News Saturday” in the shop on the day, where people are invited to book their attendance. Whilst the drama and excitement of revealing the secret might be fun; if the new model is not something that people want, it would be a wasted trip with an air of disappointment. The RTJ-Friends are considering the odds on the following possibilities; the retooled T43 diesel (as previously hinted, so not exactly a ‘surprise’); the S1 steam loco which was proposed a few years ago; the X50 Regina trains which were proposed a few years ago; the Z67 diesel shunter which was proposed a few years ago; the Mg electric loco as a much needed possibility; the T4 or latterly T41 diesel loco as a much needed possibility; and the type B steam loco as a much needed possibility! The trailers for the Y6 railbuses have been proposed for a while so they can hardly be considered a secret; and Jeco has announced another orange Rc2 (as 1094) and a black Rc3 (as 1067).

Other News

2024 was the 75th anniversary of the first Saab car going to production. We had hoped to have a car rally somewhere on a layout (as we have done in the past) to commemorate this, but we have no layout, only a few of our models available to hand, and the new model of the 9000 is not available yet. So our photo shews a 92B, 99, and three versions of the 900.

This is our last monthly update. We will provide brief updates during months 2, 5, 8 & 11; so the next one won’t be too far behind, and probably won’t have very much news! Happy new year to all our friends, near and far.

Nyheterna från november 2024

Våra Nyheter

Vi har en annan modell av ånglok, förmodligen ett som väldigt få modellbyggare känner till. Den tycks överensstämma med den svenska U-klassen från förra sekelskiftet, med bara några få subtila skillnader. Men intressant nog är det en Tenshodo-modell, troligen konverterad från dess amerikanska specifikation, och dessa prototyper levererades till flera europeiska järnvägar. Vi kommer att försöka modifiera det kosmetiska utseendet för att göra det ännu närmare “U” under nästa år. Eftersom den antagligen är 75 år gammal var den dålig efter leverans, men med en liten städ- och oljarunda fungerar den nästan som ny nu.

Vi förstår nu att Dekas-modellerna inte är avsedda för analoga järnvägar. De levereras endast med “avkodnings”-chips (med eller utan ljud), som felaktigt ryktas vara OK på analoga system. Sådant nonsens prövades på FLMJ och de fungerar inte tillförlitligt på analoga alls. För vår Y2K-modell har vi nu skaffat ett ersättningschip från en tredje part för att passa in i sockeln för att modellen ska fungera korrekt. (Digitrains [www.digitrains.co.uk] säljer sin BP21, en 21-stifts Blanking Plug, för £2 (vid presstillfället), vilket vi är mycket nöjda med.) Det skulle kosta Dekas väldigt lite att göra denna investering för deras modeller (ett analogt chip för att passa uttaget) och skulle öka kundlojaliteten. Ändå förstår vi att de fortfarande utreder problemet som det ser ut.

Tillverkarens Nyheter

De orangea Jeco Rc-loken har blivit försenade på grund av ett färgfel på fabriken, men början av 2025 är den nya leveransuppskattningen för rätt modell. De lägger till ytterligare ett orange (Rc) lok till sitt utbud och ett svart.

Roco har gett ut en ny uppsättning ‘Mas’-vagnar, men som typ ‘Ud’ med UIC-nummer; artikel 6600069. Som vi förstår det är detta ett paket med fyra olika numrerade vagnar, och det fastställda priset är cirka 1600 kr.

One87 har tagit fram det typiska svenska buffertblocket, tillgängligt via Tradera i ett paket om fyra; ett efterlängtat tillskott till den svenska H0-skalan! Dessa gula block ses över hela Sverige, och det är underförstått att de också används i mindre utsträckning i grannlandet Norge. En annan svensk tillverkare har gjort olika buffertstopp av mer generisk karaktär, och ville se hur bra de sålde innan man bestämmer sig för att göra denna gula version eller inte. Det här är en galen policy för om folk inte vill ha fel vara kommer de inte att köpa fel vara! One87 har även producerat för försäljning via Tradera, den typiska svenska telefonkiosken typ M61, en sandlåda i olika färger och en soptunna! Se dem på https://www.tradera.com/profile/items/4123195/one87

Vi är ledsna att höra att innehavaren på Modellproduktion, Bengt Lindberg, plötsligt avlidit. Han hade tillverkat modeller av tåg som r-t-r-tillverkarna hade försummat, som T45- och Tc-diesellokomotiven, som vi har modeller av, men också fler som vi hade hoppats på att skaffa när pengarna tillät. (Vi vet inte om någon annan har tagit på sig produktionen.) Knappt hade dammet lagt sig från denna sorgliga nyhet, vi hörde också att Sven-Olof Olofsson på Entec har dött. Sven-Olof hade tillverkat många komponenter för svensk kontaktledning i H0-skala, inklusive fint detaljerade men fungerande strömavtagare; förutom olika andra mycket användbara artefakter inklusive signalering. Vi framför våra uppriktiga kondoleanser till båda familjerna.

Andra intressanta nyheter

Vi kommer att ha bara en månadsuppdatering till efter denna. Syftet med denna webbplats har varit att främja vår(a) järnväg(ar) och intresset för svensk järnvägsmodellering. Den är inte tänkt som en blogg, vilket den har sett ut att ha blivit! Istället kommer vi att ge uppdateringar i februari, maj, augusti och november, med fokus främst på utvecklingen av den nya järnvägen, men också för att komma med andra intressanta och relevanta nyheter.

Samtidigt, för att göra den här webbplatsen mer anpassad för sitt avsedda syfte, kommer vi att ta ner några artiklar och ersätta dem med mer direkt information om modellering av den svenska järnvägen, lättare att läsa och lättare att hitta relevant information. Vi hade startat denna process under 2024, men vår vision var inte klar. Det är nu.

News from November 2024

Our News

We’ve acquired another model steam locomotive, quite possibly one that very few know about. It seems to conform to the Swedish U-class from the turn of the last century, with only a few subtle differences. But interestingly, it is a Tenshodo model, probably converted from its American specification, and these prototypes were supplied to several European railways. We will try to modify the cosmetic appearance to make it even closer to the ‘U’ during the next year. Being probably about 75 years old, its post delivery performance was poor, but with a little TLC (including cleaning and oiling round), it is running almost as new, now.

It is now understood that Dekas models are not intended for analogue railways. They are only supplied with ‘decoding’ chips (with or without sound), which are rumoured incorrectly to be OK on analogue systems. Such nonsense was trialled on the FLMJ and they do not work reliably on analogue at all. For our Y2K model, we have now obtained a replacement chip from a third-party to fit into the socket to allow the model to function properly. (Digitrains [www.digitrains.co.uk] sells their BP21, a 21 pin Blanking Plug, for £2 (at time of press), which we are very satisfied with.) It would cost Dekas very little to make this investment for their models (an analogue chip to fit the socket) and would boost customer loyalty. Nevertheless, we understand that they are still investigating the problem as it stands.

Manufacturer News

The Jeco orange Rc-locos have been delayed due to a livery error at the factory, but early 2025 is the new estimate for the correct model. They are adding another orange (Rc) loco to the line-up and a black one.

Roco has issued a new set of ‘Mas’ wagons, but as type ‘Ud’ with UIC numbers; article 6600069. As we understand it, this is a pack of four differently numbered wagons, and the set price is around 1600 kr.

One87 has produced the quintessential Swedish buffer-block, available via Tradera in a pack of four; a long overdue addition to the Swedish H0-scale scene! These yellow blocks are seen all over Sweden, and it is understood that they are also used to a lesser extent in neighbouring Norway. Another Swedish manufacturer has made different buffer stops of a more generic nature, and wanted to see how well they sold before deciding whether or not to make this yellow version. This is a crazy policy because if people don’t want the wrong item, they won’t buy the wrong item! One87 has also produced for sale via Tradera, the quintessential Swedish telephone kiosk type M61, a sand box in assorted colours, and a waste bin for the pre-wheely-bin epoch! See them at https://www.tradera.com/profile/items/4123195/one87

We are saddened to hear of the sudden passing of the proprietor at Modellproduktion, Bengt Lindberg. He had been producing models of trains that the r-t-r manufacturers had neglected, such as the T45 and Tc diesel locomotives, of which we have models, but also more that we had hoped to acquire when funds permitted. (We do not know if anyone else has taken on the production.) Hardly had the dust settled from this sad news, we heard also that Sven-Olof Olofsson at Entec has passed away. Sven-Olof had been producing many components for Swedish overhead electrification in H0 scale, including finely detailed but working pantographs; in addition to various other very useful artefacts including signalling. We offer our sincere condolences to both families.

Other News

We will have one more monthly update after this. The purpose of this website has been to promote our railway(s) and an interest in Swedish railway modelling. It is not intended as a blog, which is what it has seemed to have become! Instead, we will provide updates in February, May, August and November, focussing mainly on the development of the new railway, but also to bring other interesting and relevant news.

At the same time, to make this website more fit for its intended purpose, we are going to take down a few articles and replace them with more direct information about modelling the Swedish railways, easier to read and easier to find the relevant information. We had started this process during 2024, but our vision wasn’t clear. It is now.

Behind the Scenes

Mini-Series about the new railway; 12: Taking Stock

This year, we have described the proposed new railway (or railways (plural)) being built here at our new location in Sweden. As before, none of this will be open to the general public; but guest events will be organised, and anyone interested in joining the guest-list will be welcome to get in touch.

The Railway will continue in 12v analogue. Both arguments (analogue and digital) have their merits, but for us and for what we enjoy with this hobby, analogue is the clear winner. The Railway continues to represent something in miniature, and should be regarded as a Railway, not as a train-set. (There is a Brio train set available, to entertain our younger visitors!) The Signalling is designed to be easily understood, even with the aspects and indications that seem unusual to non-Swedish operators. And yes, there is a timetable being developed, which will have the curious feature of no moving trains at times that coincide with fika and lunch breaks!
Scenery is one of our biggest challenges. Before the KRBJ, there was an indoor layout (not Swedish) which was a scenic diorama that happened to have a railway running through it. The diorama was convincing and very photogenic; but that was a long time ago. The main town scene at Rickbacken is to be inspired by the drawing of a town inside the back cover of a children’s book series; a layout that is perfectly suitable for a very Swedish diorama—Axel and Omar would approve (to appreciate this subtlety; you’d need to be familiar with the books)! The manor house at Skarpa Gård will probably need to be scratch-built (and the last project of that nature was also a long time ago) to be convincing. And making everything fit in at Töjnan could be worthy of a book of its own! Along the Stuverydsbäckens Järnväg, no scenic plans have been made yet; and none are intended along Trädgårdslinjen.
And then, the ultimate enjoyment of sharing what we have created. An article that could be published in the British journal, “Continental Modeller” is possible; and more likely is a similar article in the Swedish journal, “Modelljärnvägsmagasinet”. Our website and a certain video-hosting channel will be kept up to date, also. But, with the Köpingsvik diorama, a physical presence out-and-about will also be possible.

All this requires time, effort and money. As we found in the last year with the FLMJ especially (though, we already knew, of course), the availability of time and money are exact opposites when one’s income provides the money, but the time needs to be spent earning that income! The effort now needs to include maintenance of the basement in which the Railway is located (the house owners have been getting it ready for us to use). But, as before, this will not be the work of one person. It needs a team effort, and that is why we have the Friends.

The phoenix has risen. “Adnalms Järnvägar” is ‘back in play’. Välkommen tillbaka!

Nyheter från oktober 2024

Våra Nyheter

Vi monterade ersättningschipet från MJ-Hobby på vår T23, och efter lite justeringar här och där fick vi loket att fungera som det skulle, med bra kontroll av långsam hastighet. Tyvärr, efter att ha tagit bort huvudkretskortet under vår tidigare undersökning, gick den wafer-tunna bandkabeln till lamporna i B-änden av (ganska odramatiskt) och därför har vi inga lampor i den änden nu. Förhoppningsvis kan Jeco leverera en ersättning (det är en plugin-del). Märkligt nog är chipet märkt LP5, som en av våra vänner identifierade som Loco-Pilot 5, ett DCC-tillbehör; men bortsett från behovet av att köra in verkar loket vara OK på analogt med detta chip.

Dekas Y2K i analog form, har samma problem som T23! En har kommit hit och vi är i dialog med vår leverantör om att få detta problem åtgärdat; förhoppningsvis behöver den bara ett ersättningschip. Som vi förstår det har modellen levererats med ett DCC-chip som även kan fungera på analogt. Vi vet av erfarenhet att detta är hopplöst opålitligt, och ett ordentligt släckchip bör installeras. Dessa chip med dubbla funktioner fungerar inte på PWM (Pulse Width Modulation) strömförsörjningssystem, som fortfarande är populära på analoga layouter – inte våra ännu; men vi skulle vilja ha valet, med tanke på de fördelar som PWM har att erbjuda!

För att finansiera köpet av Y2K bestämde vi oss för att skiljas från ett annat tåg som sällan användes på FLMJ och som är ännu mindre sannolikt att “passa in” på RTJ; de två X10-tågen (komplett med ersättningschassit som köptes ganska nyligen). Köparen är en vän till RTJ så kanske vi fortfarande kommer att se den i fotoformat under åren framöver.

Tillverkarens Nyheter

Under de senaste månaderna har Jeco levererat sina nyare Rc2-versioner, mestadels med ex-ÖBB-belysningsarrangemanget. Man kan bara spekulera i hur snart Rc1 och Rc4 (båda i orange) kommer också.

Precis när vi slutförde den här uppdateringen kom PCX87-modellen av den moderna Volvo V90 till butikerna.

Andra nyheter

Något att tänka på… Efter att X1-tågen introducerades följde X10 efter, och en av förbättringarna var en bättre hytt, starkare för att skydda föraren i händelse av en mindre kollision eller plankorsning. I september körde ett ännu nyare X40-tåg ett traktorsläp på en korsning, och som den publicerade bilden visar fick föraren inte särskilt mycket skydd (föraren hade lämnat sin plats i sista stund och befann sig bakom skottet vid punkten av inverkan). Hytten är gjord av glasfiber eftersom det är ett lätt material att arbeta med för att få tågen att se trendiga ut (något som X40 inte riktigt lyckas med ändå). Men det verkar som att branschen behöver ompröva sina prioriteringar.

News from October 2024

Our News

We fitted the replacement ‘chip’ provided by MJ-Hobby to our T23, and after some tweaking here and there we got the locomotive to work as it should, with good slow-speed control. Unfortunately, having removed the main circuit board during our earlier investigation, the wafer-thin ribbon cable to the lights at the B-end snapped (quite undramatically) and thus, we have no lights at that end now. Hopefully, Jeco can supply a replacement (it is a plugin part). Curiously, the chip is marked LP5, which one of our Friends identified as Loco-Pilot 5, a DCC accessory; but aside from the need to run-in, the loco does seem to be OK on analogue with this chip.

The Dekas Y2K in analogue form, has the same problem as the T23! One has arrived here and we are in dialogue with our supplier about getting this problem fixed; hopefully it just needs a replacement ‘chip.’ As we understand it, the model has been supplied with a DCC chip that can also work on analogue. We know from experience that this is hopelessly unreliable, and a proper blanking chip should be installed. These dual-function chips do not work on PWM (Pulse Width Modulation) power supply systems, which remain popular on analogue layouts – not ours as yet; but we would like the choice, given the advantages that PWM has to offer!

In order to finance the purchase of the Y2K, we decided to part company with another train which seldom got used on the FLMJ and is even less likely to ‘fit in’ at the RTJ; the two X10 units (complete with the replacement chassis that was purchased quite recently). The purchaser is a Friend of the RTJ so maybe we will still see it in photo format in years to come.

Manufacturer News

Over the last few months, Jeco has been delivering their newer Rc2 versions, mostly with the ex-ÖBB lighting arrangement. One can only speculate how soon the Rc1 and Rc4 (both in orange) will also arrive.

Just as we were finalising this update, the PCX87 model of the modern Volvo V90 arrived into the shops. Quite recently, the Minichamps 850 arrived also, both sedan and estate.

Other News

Something to think about… After the X1 units were introduced, the X10 followed, and one of the improvements was a better cab, stronger to protect the driver in the event of a minor collision or level crossing strike. In September an even newer X40 unit hit a tractor’s trailer on a crossing, and as the published image shews, the driver didn’t get much protection (the driver had left his seat in the last moment and was behind the bulkhead at the point of impact). The cab is made from fibreglass as it is an easy material to work with to make the trains look trendy (something that the X40 doesn’t quite achieve anyway). But it seems that the industry needs to reconsider its priorities.

Behind the Scenes

Mini-Series about the new railway; 11: Making it all work

The FLMJ had a simple analogue electrical system, and this is planned for the RTJ and all of the ‘attachments’ to it. Each track section had a two-way, centre-off (DTCO) switch. Switched one way, the track was connected to the local controller; switched the other way, the track was connected to a remote controller (from another station, for example), and there was a rotary switch to select between different remote controllers.

This principle worked well, but it is possible that it can now be made even easier. There were vague thoughts about how the FLMJ’s switching could be made easier, and as we prepare the RTJ, these thoughts can be put into practice. Each section within any location (through tracks and sidings at a station, for example) could have an on-on switch, and the DTCO switch. The first of these would determine if the track is switched to the local controller directly, or to the DTCO switch. The DTCO would then select station throat at one end or at the other end (or off). (If the station throat serves two lines, as a junction for example, then the position of the points would determine which ‘line’ is connected.)

Going to a much more intense level, we have often played with the idea of latching sections with relays (solid-state to keep the cost down). The thought is that a controller is selected by push-button on the track diagram, and a relay latches that section on. Using the polarity in the track, the next section then connects to the same controller, and as the train passes certain predetermined locations, the sections ‘to the rear’ disconnect and become available to the next train. (To some extent, the correct use of signals can assist with track selecting.)

We are also developing a train detection system for analogue, which in its simplest form uses electronic treadles at key locations, but in its more advanced form can use axle counters. (Being analogue, we can use the track polarity to determine the direction of travel!) This can be used in conjunction with signalling and interlocking; but it’s still under development so no more ought to be said at this stage!

In all cases, we are able to keep the control system easy to create and to use. (This is what DCC was supposed to achieve, but in practice we have observed people struggling to make it work and layouts coming to a complete standstill; not exactly conducive to an enjoyable hobby!) The purpose of simple cabling and switching with Analogue is that it is easy to install, easy to trace, easy to fix. It just needs a very basic understanding in natural logic. And each step forward in creating something like this, or modifying it, or repairing it, gives a great sense of satisfaction and achievement that is not available with DCC.

Next Month: Taking Stock.